Fleetr Tracker Specs

Fleetr Tracker Specs

Fleetr Tracker 4G- Product Features and Specifications


Model LMU3040

Dimensions

1.88 x 2.50 x 1.14” (48 x 63.25 x 29 mm)

Weight

2.54 oz. (72 g)

Temperature Range

-30° to +60° C (connected to primary power)
-10° to +60° C (operating on internal battery)
-20° to +25° C ≤ 6 months (long term storage)

Supply Voltage

12V (min. 9V to max. 18V)

Battery

180 mAH

Current Consumption

 Typical 675 uA @ 12V (deep sleep)
Typical 2 mA @ 12V (sleep on active network)
Typical 60 mA @ 12V (active tracking with GPS and cell enabled)

Celullar Communications 

LTE CAT-M1

2100 (B1)/1900 (B2)/1800 (B3)AWS 1700 (B4)/850
(B5)/900 (B8)/700 (B12/B13/B28)/800 (B18/B19/
B20)/1900 (B39/B25) MHz
GSM/GPRS
850/900/1800/1900 MHz

Module RF Sensitivity

109 dBm typical @ 800/850/900 MHz
109 dBm typical @ 1800/1900/2100 MHz
Sensors Accelerometer: Triple-axis, impact, motion sense
Gyroscope: Triple-axis

Geo-Location & Tracking 

Hybrid GPS, GLONASS, SBAS Engine (WAAS, EGNOS, MSAS)

OBD-II Interface

J1850 PWM, J1850 VPW, ISO-9141-2, ISO-14230 KWP 2000,
ISO-15765 CAN, SW-CAN

 

    • Related Articles

    • Asset Tracker Specs

      Asset Tracker Product Features and Specifications Asset Tracker Wired Asset Tracker Wireless Power Source Internal Battery Internal Battery Communication Wireless; 3G/4G Cellular Data Wireless; 3G/4G Cellular Data Battery Recharge 12v Inline 5v 1A ...

    • Asset Tracker FAQ

      How does the asset tracker determine its location? The device calculates its position using GPS signals. If GPS is obscured (such as inside a metal building), it falls back to Cell Tower Trilateration to estimate location within a 1/2-mile radius. ...

    • Asset Tracker Guide & Signal Troubleshooting

      This guide covers setup, LED diagnostic indicators, mounting best practices, and location behavior for the Asset Tracker. 1. Device Setup & Power Controls Hardware Components: Package includes the ST4932 tracker, 8 assembly screws, Micro-USB data ...

    • Asset Tracker Quick Set Up

      We are excited that you have chosen to partner with us! This is a quick setup guide to your asset tracker device. 1. Power & Turn On the Device: USB Rechargeable Model: Charge for 5 hours before use. Once charged, press and hold the small red button ...

    • Switching a Device to a New Vehicle

      Before physically swapping a Fleetr tracker to another vehicle, update the device-to-vehicle association in your account to ensure accurate tracking data and reports. Step 1: Update Vehicle & Driver Information You can reassign the device yourself ...